Hytera E-pole200 ad hoc repeater
Expand the ad hoc DMR network with nodes on poles or walls. The E-pole200 offers two communication paths and radio interconnection to distribute coverage without creating an IP link at each point.
It is infrastructure: requires power, antennas, mounting, and frequency planning. IP65 and ad hoc architecture do not guarantee coverage in any terrain.
External mounting
Pole or wall according to project
Two paths
Up to 10 W per path
Up to 31 nodes
Ad hoc DMR network
IP65
Protection for installation
Hytera
Meet the Hytera E-pole200
The E-pole200 brings ad hoc architecture to distributed points. The nodes forward communication between areas without relying on fiber for interconnection. The project requires adequate propagation, mounting, electrical protection, and maintenance access.
- External mounting: Pole or wall according to project
- Two paths: Up to 10 W per path
- Up to 31 nodes: Ad hoc DMR network
Distributed coverage
Nodes do not replace engineering
Up to 31 nodes can make up the network. Position and link conditions determine continuity; the number of nodes does not prove coverage distance.
Power and contingency
Power at each point
Nominal power is 48 V DC. Standalone power and supporting LTE depend on configuration and sizing; they are not automatic benefits of every installation.
Why choose Hytera E-pole200?
The E-pole200 brings ad hoc architecture to distributed points. The nodes forward communication between areas without relying on fiber for interconnection. The project requires adequate propagation, mounting, electrical protection, and maintenance access.
Two-path interconnection
The E-pole200 operates in DMR Tier II, with 1, 5 or 10 W per path. Simultaneous transmission and forwarding over multiple hops require programming for the scenario. VHF and UHF are distinct variants, with corresponding antennas.
Post or wall
The equipment measures 238 × 138.2 × 330.9 mm and weighs 5.2 kg. Support, structure, grounding, surge protection and cables must be included in the planning. The assembly must allow safe maintenance.
Coexistence with networks
Hytera reports support for DMR Tier II and interoperability with the first ad hoc generation. This does not prove every combination of features or models. Integration must be validated on the actual units, especially with other manufacturers.
Hytera E-pole200 specifications
Check the variant in the technical proposal. Features, bands and kit composition may depend on the version indicated by the manufacturer.
| Bands | VHF 136 to 174 MHz or UHF 400 to 470 MHz |
|---|---|
| Protocol | Conventional DMR Tier II |
| Network | Up to 31 nodes |
| Spacing | 12.5 kHz |
| RF Power | 1 / 5 / 10 W per path; up to 20 W total |
| Power Supply | 48 V DC |
| Dimensions | 238 × 138.2 × 330.9 mm |
| Weight | 5.2 kg |
| Protection | IP65 |
| Temperature | -30 to +60 °C |
Technical documentation
Applications of the Hytera E-pole200
Distributed areas
Radio points interconnect operation zones according to RF study.
No fixed link
Ad hoc reduces dependence on fiber between nodes, without dispensing power and planning.
Support infrastructure
Expansion of compatible architecture, with interoperability validation and maintenance.
Tell ABC Mais Telecom how your team works. The indication considers environment, integration and the resources necessary for the operation.
Installation planning
The project must size 48 Vdc power supply, antennas, installation points and network integration. Solar power and LTE connection depend on the configuration and planned infrastructure. The selection of components requires technical validation.
Documented installation kit
The official European brochure for the Hytera E-pole200 identifies a mounting kit and a power cable as standard accessories. The document does not provide the commercial part numbers for these items.
Mounting can be on a pole or wall. Confirm with the technical team the kit, power supply, and composition of the Brazilian supply before installation; do not replace these parts with E-pack200 accessories just because the names are similar.
Talk about the Hytera E-pole200
Provide the quantity, place of use, and integration your team needs. Request a no-obligation quote.
Response by email and WhatsApp. No obligation · price on request. We also rent: in rentals, Anatel frequency licensing is already included by ABC Mais Telecom.
Questions about Hytera E-pole200
Is it a portable radio?
No. It is a repeater for installation, with 48 V DC power supply and a weight of 5.2 kg.
Does it need fiber between points?
Not for ad hoc interconnection. The conditions of the radio links remain essential.
Does any installation use solar power?
It is necessary to size consumption, autonomy, storage, and electrical protection.
Is it possible to promise range in kilometers?
Not without evaluating terrain, antennas, obstacles, interference, and installation links.
